Jiangsu Nicedecor Industrial Co., Ltd.

was established in 2011,which was located in Jiangsu. It mainly produce PU mouldings, PU stone, 9 blocks PU components, PU geometry and other PU light decorative building materials.

Lightweight Soft Stone Tiles

Short Description:

The soft, thin, flexible wall tile is based on inorganic material, and consist of high molecular polymer, it’s a special processed new interior and exterior wall decorative material.


Product Detail

Product Tags

Flexible Wall Tiles Composition


The soft, thin, flexible wall tile is based on inorganic material, and consist of high molecular polymer, it’s a special processed new interior and exterior wall decorative material. It has the features of good flexibility, good mechanical strength, good anti-mechanical impact performance, simple construction, good durability and strong sticking performance. As the color, structure, shape can be customized as customer’s requirement, the architect and customer can image different style from different surface structure, the size of wall tile and color. Hence, it makes the interior and exterior decorative building material more colorful. Especially, the flexible wall tile is similar to traditional clay brick’s structure and style, the flexible wall tile has high-tech, good performance and price. It’s energy- saving product.

How to install?


It can be easy to cut into any shape and sizes as your request.

And it can glue with adhesive same as the normal wall tiles, no special materials request.

1)Spread Tile Adhesive mixture to the tiles
  Snap the line, and stick cement adhesive mixture to back side of the tiles. Adhesive mixture should be evenly applied and the thickness should be 2-3 mm, and adhesive area should cover more than 85%.
2)Fill the joints
  The joints should be filled by special cement-based gap filler or silicone adhesive meeting National Standard. The adhesive mixture is not allowed to fill the joints directly to avoid alkali efflorescence.
3)Point Joints
  The joints should be made by copper rod, and the joints should be dished, smooth, plump.
4)Clean wall tiles
  Clean the dirt of joint filler or cement mortar on surface and sides of the tiles before setting, mapping by dry sponge or scratching by plaster trowel. Fabric cloth with water is not allowed, or else resulting in alkali efflorescence.
5)Process Exterior Corners
1.Hitom edge is on the left side of the interface, with a smooth seam sealant.
2.Make 45°Diagonal by rotary sander, and match two tiles correctly.
3.Lapping joints is not allowed at exterior joints when tiles are thin. For lapping joints, 2-3 mm seam should be made at the lapping. The seam should be filled by joint fillers and someone must be put in charge of the work, then painted by coating of same color.